Onpow Industrial Power Distribution Terminal Block-Switch Terminal Series (TTK-6S)

TTK test-type wiring terminal:The movable medal omponent used as switch could stand maximum work current through terminal wire-pressing frame.When in switch-over,operator should use screw-driver to whirl screw loosely and move slipping-lump.Then the switch would be seen clearly.There is test socket at two sides of terminal

Featured Products

TTK test-type wiring terminal:
The movable medal omponent used as switch could stand maximum work current through terminal wire-pressing frame.When in switch-over,operator should use screw-driver to whirl screw loosely and move slipping-lump.Then the switch would be seen clearly.There is test socket at two sides of terminal in addition to corresponding test plugs used to form test connection,the system operation doesn't need to be supended at the time of measuring current.
Technical DateDatailed parameters
IEC947-7-1Rigid cable(mm)Soft cable(mm)AWGI(A)U(V)
0.5-100.5-620-857400
Rail DimensionsThickness/Width/Height/Height: 8.2/72/51.5/56.5
Insulating impulse voltage withstand6KV
Pollution degree3
Inflaming retarding gradeV0
Torque(Ib-in)1.2-1.5(Nm)
Clamping Screw(M)M4
Insulation stripping length(mm)13mm
Shell materialPA
Copper materialCopper alloy
Screw materialIron nickel plating
Material / Avaliable ColorBrown,Gray;
Red,Orange,Blue,White,Black can be made to order
AccessoriesModel
End plateD-TTK-6S
Central adaptorTFB6S/10/S(Short)
TFB6S/10/L(Long)
Segment spacerTTP6S
Mark barZB8
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours